Northern California’s Trusted Rebar and Concrete Building Materials Supplier Since 1968

1100 Clear Cure is a membrane-forming curing compound that meets ASTM C309 requirements. It retains moisture in fresh concrete for complete hydration without discoloring the surface — ideal for architectural flatwork, parking lots, and sidewalks. Available at Capitol Steel, 36/pallet.

The Alert Cast ADA tile is a specialized detectable warning surface in the standard 36"x60" cast-in-place format, designed for high-contrast alert-pattern applications at transit platforms, light rail boarding zones, and high-pedestrian-traffic locations.

Like all Capitol Steel ADA tiles, the Alert Cast meets ADA Standards for Accessible Design and California Title 24 accessibility requirements. Contact our sales team to discuss your project requirements and confirm code compliance for your jurisdiction.

Capitol Steel supplies ADA-compliant detectable warning surface tiles for cast-in-place installation at curb ramps, transit boarding areas, and pedestrian access routes. Our cast-in-place tiles are set directly into the wet concrete pour for a permanent, flush-mounted installation that meets ADA Standards, California Title 24, and local jurisdiction requirements.

Available in 36"x48" and 36"x60" sizes. These tiles are required on virtually all new and reconstructed public sidewalk projects in California. Contact Capitol Steel for pricing, color availability, and project quantities.

Aervoe Construction Marking Paint is a professional-grade, upside-down inverted spray paint engineered for job site layout marking and utility identification. The can is operated exclusively in the inverted position, making it ideal for marking directly on pavement, gravel, soil, and concrete surfaces without bending over.

Formulated for good initial color brightness, excellent adhesion, and color retention for up to 3 months depending on traffic and exposure. Meets OSHA and APWA/ONE Call Systems standards. Available in multiple colors for color-coded layout, utility marking, and construction site identification. Aervoe offers the most complete line of inverted marking paints and specialty marking coatings in the industry.

All thread rod (fully threaded rod) is used in anchor assemblies, hanger rods, tie-rods, and through-bolt applications. Capitol Steel stocks all thread in standard diameters and lengths with cut-to-length service available. Pair with our nuts and washers for a complete assembly.

Capitol Steel stocks anchor bolts in a full range of configurations for cast-in-place and post-installed applications — from sill plate connections on residential foundations to heavy structural column bases. Available in J-bolt, L-bolt, and headed styles in multiple diameters and lengths. Contact us for project quantities and pricing.

The bag tie tool is an economical manual option for tying rebar on smaller jobs. It loops and twists tie wire around rebar intersections with a quick flick of the wrist, reducing hand fatigue compared to free-hand tying. Ask Capitol Steel about our bag tie tools when you pick up your rebar order.

Capitol Steel stocks cutting blades for concrete saws, angle grinders, and cut-off saws. We carry both diamond blades for concrete and masonry and abrasive wheels for steel cutting. Ask about blade sizes compatible with your equipment when you order.

Capitol Steel carries heavy-duty bolt cutters in multiple sizes for cutting tie wire coils, trimming small-diameter rebar, and general site use. A practical tool to have on any concrete pour crew. Ask our team for current sizes in stock.

Center slab rebar hangers suspend reinforcing steel at the precise mid-depth of elevated concrete slabs, ensuring consistent cover on both faces. Capitol Steel carries these hangers to complement your complete forming and reinforcement package. Contact us for sizing options and current stock.

Capitol Steel supplies bagged construction materials to complement your rebar, forming, and hardware orders. Our inventory includes non-shrink construction grout, mortar mix, standard concrete mix, Portland cement, and specialty products including W.R. Meadows CG-86 high-performance grout and Type S masonry mortar. One-stop supply for your entire project.

Capitol Steel carries measuring tapes and specialty construction tapes to support your field crew. Ask about Perminator seam tape for vapor barrier installations and standard layout tapes. Bundle with your other Capitol Steel supplies for one-stop convenience.

Decra Seal is a water-based acrylic compound that simultaneously cures and seals concrete flatwork. It reduces moisture loss during hydration and leaves a durable protective film that resists dusting and abrasion. Available through Capitol Steel in Sacramento — 36 units per pallet.

Dobies (precast concrete block chairs) ensure correct rebar positioning and concrete coverage in slabs, footings, and walls. Capitol Steel stocks a full range of dobie sizes with and without tie wire. Available individually or by the bundle — essential for code-compliant concrete work.

Capitol Steel stocks drill bits and accessories for concrete and masonry drilling, including rotary hammer bits for anchor bolt installation. We carry a practical selection of sizes to match the anchor systems we sell. Contact our team for specific diameter availability.

A job site staple, heavy-duty duct tape provides strong, reliable adhesion on a wide range of surfaces including metal, plastic, wood, and concrete forms. Capitol Steel carries professional-grade duct tape suited for sealing vapor barriers, bundling materials, temporary repairs, and general construction use.

Available in standard silver/gray. Strong cloth-reinforced backing resists tearing while conforming to irregular surfaces. Contact us for roll sizes and pricing.

Evapre is an evaporation retardant sprayed directly on fresh concrete immediately after screeding to slow moisture loss and prevent plastic shrinkage cracking — especially critical in hot, dry, or windy Sacramento conditions. Capitol Steel stocks Evapre in pails at 36 units/pallet.

Expansion joint caps snap over the top of fiber expansion joint material to protect it during and after the pour. Capitol Steel stocks 3/8" and 1/2" caps in 1000-linear-foot bundles. Pair with our expansion joint material for a complete isolation joint system.

Expansion joints isolate concrete slabs from adjacent structures and control cracking from thermal movement and settlement. Capitol Steel stocks fiber expansion joint material in 3/8" and 1/2" thicknesses in multiple widths (2", 3", 4", 5"). Contact our sales team for linear footage pricing and bundle quantities.

Form oil is applied to wood, steel, or aluminum forms before each pour to prevent concrete from bonding to the form surface. Capitol Steel stocks form oil in pails and drums — 36 units per pallet. Essential for clean form stripping and reuse on any commercial or residential project.

GatorBar is a Glass Fiber Reinforced Polymer (GFRP) rebar manufactured in the USA. Unlike steel rebar, GatorBar will never rust, corrode, or cause concrete spalling — making it ideal for slabs, flatwork, and marine applications exposed to moisture and chemicals. It is non-conductive and non-magnetic.

The #3 (3/8") size has a guaranteed tensile strength of 155,000 psi (Grade 155), more than twice the strength of standard steel rebar, at a fraction of the weight. Its sliver-free surface makes it safe and fast to handle on the job site.

GatorBar #4 (1/2" diameter) fiberglass rebar delivers the same corrosion-free performance as the full GatorBar line, scaled up for heavier-duty flatwork, footings, and foundations. At Grade 155 tensile strength (155,000 psi), it exceeds standard steel rebar strength while weighing a fraction as much.

Because GatorBar doesn't conduct electricity and won't rust, it's the go-to choice for parking structures, bridge decks, marine environments, and anywhere long-term concrete integrity matters. Made in the USA.

GatorBar #5 (5/8" diameter) is the largest standard size in the GatorBar fiberglass rebar lineup, designed for structural concrete applications where traditional steel rebar is vulnerable to corrosion. With a guaranteed tensile strength of 129,000 psi (Grade 129) and a weight roughly 7 times less than steel, it dramatically reduces labor costs on heavy projects.

Ideal for highway construction, sea walls, waste water treatment plants, driveways, and any concrete application requiring long-term durability in corrosive environments. Sliver-free surface for safe handling. Made in the USA.

Capitol Steel carries Klein Tools professional pliers — the preferred brand of concrete and rebar workers. Klein rebar tying pliers allow fast, consistent wire ties at the pace your crew needs. We stock standard models — contact us for current availability.

Capitol Steel stocks forming lumber to support your concrete pour projects. Available in standard construction dimensions — contact our sales team for current sizes, board footage pricing, and availability in Sacramento.

Med Cure is a proven curing compound for general concrete flatwork including driveways, slabs, and sidewalks. It forms a moisture-retaining membrane over fresh concrete to ensure proper hydration. Capitol Steel stocks Med Cure in pails at 36 units per pallet.

Capitol Steel carries duplex nails, duplex screws, and sinker nails for concrete forming and general construction applications. Duplex (double-headed) nails are ideal for temporary forming work — they drive flush but pull out easily after the pour. Ask our team for current sizes and pricing.

Capitol Steel stocks a complete range of nuts and washers to accompany anchor bolts and all thread rod assemblies. We carry standard hex nuts, hot-dip galvanized nuts for exterior and embedded applications, coupler nuts for rod splicing, and both round and square plate washers for bearing area requirements. Available by the piece or in bulk.

Capitol Steel carries a selection of paints and coating products for construction site use — from marking paint for layout lines and grade stakes to protective coatings for concrete and steel surfaces. Our inventory includes products suited for interior and exterior applications in commercial and residential construction.

Contact our Sacramento sales team for current product availability, brand selection, and volume pricing.

Pencil rods are small-diameter steel rods used in concrete forming, as chair support pins, and light structural ties. Capitol Steel stocks pencil rods in coil and straight forms — call our sales team for current sizes and availability.

#3 rebar (3/8" diameter) is one of the most commonly used sizes for residential slabs, driveways, sidewalks, and light footings. Capitol Steel stocks Grade 40 and Grade 60 in standard 20-ft and 40-ft lengths. Cut-to-length available — contact us for pricing and availability.

#4 rebar (1/2" diameter) is the workhorse of residential and light commercial construction — used in footings, stemwalls, columns, and slabs-on-grade. Available in Grade 40 and Grade 60, stocked in 20-ft and 40-ft lengths at our Sacramento yard.

#5 rebar (5/8" diameter) is widely specified for structural concrete walls, retaining walls, grade beams, and commercial foundations. Capitol Steel stocks Grade 60 in standard lengths — contact our sales team for project quantities and delivery.

#6 rebar (3/4" diameter) is used in heavier structural elements such as columns, grade beams, retaining walls, and parking garage decks. Contact Capitol Steel for availability and project pricing in the Sacramento region.

#7 and #8 rebar are used in large-scale structural and civil projects — bridge components, heavy retaining walls, industrial slabs, and seismic retrofit applications. Capitol Steel supplies both sizes in Grade 60. Call for current stock and lead times.

Capitol Steel carries both Castle Chairs and EZ Chairs for maintaining accurate rebar clearance in slabs, beams, and elevated decks. These lightweight plastic/wire supports seat rebar firmly and resist displacement during concrete placement. Ask our team about the right chair height for your pour depth.

Capitol Steel stocks rebar cutter/bender tools that let crews cut and bend rebar to custom lengths and angles on site — eliminating the need to pre-order every shape. Available in manual and hydraulic models sized for #3 through #6 rebar. Contact us for current model selection and pricing.

A battery-powered rebar tying gun can dramatically speed up mat and deck reinforcement — experienced crews report tying 3–4x faster than by hand. Capitol Steel stocks rebar tying guns along with compatible tie wire coils. A must-have for large commercial pours. Contact us for current model selection and pricing.

Red heavy-duty duct tape is a high-visibility option for job sites where standard gray tape is difficult to spot. The red color is frequently used for safety marking, color-coded material bundling, and temporary hazard identification on construction sites.

Cloth-reinforced construction provides the same strength and adhesion as standard duct tape, with the added benefit of high-visibility color. Useful anywhere you need a tough tape that's easy to find and identify on a busy job site.

Capitol Steel proudly stocks a comprehensive selection of Simpson Strong-Tie® hardware designed for demanding concrete, masonry, and structural projects. From high-performance anchors and fasteners to specialized forming accessories, our inventory covers the full Simpson Strong-Tie line to help you build safer, stronger, and more reliable structures.We carry popular and hard-to-find items, including:

• WSWH-RT and legacy WSW anchor bolt templates for Strong-Wall® high-strength wood shearwalls – ensuring precise, code-compliant bolt placement every time.
• Steel Strong-Wall® anchor bolt templates (e.g., SSWT series) and compatible preassembled bolts (SSWAB) for cold-formed steel shearwall installations.
• A wide range of mechanical anchors, adhesive anchoring systems (like SET-3G® epoxy), Titen HD® screw anchors, wedge form ties, concrete connectors, and more.

Our extensive in-stock selection means faster turnaround and fewer delays on your jobsite. Whether you're working on foundations, shearwall anchoring, concrete forming, or restoration projects, we have the right Simpson Strong-Tie solutions readily available.

Backed by decades of industry experience, our knowledgeable team is here to guide you. We'll help you select the exact products for your application, ensure compatibility with current codes, and provide expert advice to keep your project on track and up to spec.

The Simpson Strong-Tie PAB Pre-Assembled Anchor Bolt is a cast-in-place anchor bolt designed for high-tension-load applications including rod systems and shearwalls. It features a plate washer at the embedded end, sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour.

The PAB is code listed and available in standard and high-strength steel. The stamped head shows the No Equal® sign, diameter designation, and an "H" for high-strength rods — making field inspection fast and reliable.

The Simpson Strong-Tie SABR is a cast-in-place anchor bolt available in a wide range of diameters, with a 6" threaded section that accommodates all Simpson Strong-Tie holdowns when installed on 2x or 3x sill plates. The one-piece sweep design maximizes position in the concrete, providing increased tension capacity.

SABR anchor bolts are code listed by ICC-ES under the 2012, 2015, 2018, 2021, and 2024 IBC® and IRC®. Its single-anchor design works across all foundation types, and the stamped head with alignment information makes installation fast and accurate.

The Simpson Strong-Tie SSTB anchor bolt is engineered for maximum performance as an anchor bolt for holdowns and Simpson Strong-Wall® shearwalls. Extensive testing has determined design load capacity for many common applications. Its unique offset angle reduces side bursting and provides more concrete cover, while the rolled thread delivers higher tensile capacity.

SSTB anchor bolts are code listed by ICC-ES under the 2012, 2015, 2018, and 2021 IBC® and IRC®. Identification stamped on the bolt head shows embedment angle and model for quick field verification.

The Simpson Strong-Tie SSWAB is a heavy-duty preassembled anchor bolt for attaching Steel Strong-Wall® (SSW) shearwalls to concrete foundations. Available in a variety of length and diameter options, these bolts offer the flexibility to meet specific project demands. A compression nut is fixed in place to improve performance and minimize installation error.

Each SSWAB is stamped with the No Equal® symbol, bolt length, bolt diameter, and optional 'HS' designation for high strength — making inspection and identification easy at any stage of construction. Supplied with an extra nut for attachment to anchor templates.

The Simpson Strong-Tie STHD is an embedded strap-tie holdown designed to deliver high loads in both wood and cold-formed steel construction. When installed on forms using the StrapMate® strap holder, the STHD provides enhanced stability before and during the pour — preventing both parallel and perpendicular movement for accurate positioning and reduced spalling risk.

Staggered nailing patterns minimize splitting when nailing to edges of double 2x members. Countersunk strap nail slots provide a lower nail head profile for a cleaner connection. The slots below the embedment line increase front-to-back concrete bond.

Simpson Strong-Tie anchoring adhesives allow post-installed rebar and threaded rod to develop full strength in concrete — critical for doweling into existing slabs, adding reinforcement to walls, and seismic retrofit work. Capitol Steel is an authorized Simpson Strong-Tie distributor. Contact us for the right product for your application and local code requirements.

Capitol Steel stocks a broad selection of Simpson Strong-Tie metal connectors — the most trusted name in structural connections. From joist hangers and post bases to hold-downs and hurricane straps, we carry the hardware your framing crew needs. Contact our sales team with your connector list for a competitive project quote.

The Simpson Strong-Tie Titen HD® is a high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. It offers low installation torque and outstanding performance for a wide variety of applications including sill plates, ledgers, post bases, seating, and holdown applications.

Unlike traditional expansion anchors, the Titen HD is fully removable — making it ideal for temporary applications such as bracing and formwork, or when a fixture needs to be relocated. Tested under ACI 355.2, AC193, and AC106. The stainless-steel version is available for corrosive or extreme environments.

The Simpson Strong-Tie WSWH-AB is a high-strength, pre-assembled anchor bolt specifically designed for Strong-Wall® WSWH panels and their concrete foundations. The 1" diameter, Grade 105 bolt (marked '1 24 HS') replaces the previous WSW anchor bolt with improved performance and a compression nut fixed in place for better load transfer.

All WSWH-AB anchor bolts come with a heavy hex nut, plate washer, and heavy hex nut pre-assembled, simplifying installation and ensuring consistent setup. Stamped head makes field identification and model verification straightforward on any pour.

The Simpson Strong-Tie WT Wedge Form Tie is a reusable form tie that secures concrete forms in place while the concrete is poured. The 5/8"-wide formed 'V' design provides rigidity, accurate form spacing, and support. It easily installs between form boards and holds forms square and plumb throughout the pour.

Two W1 wedges are required per tie. Wall thickness from 6" to 12". Not recommended for wall pours greater than 4' high. Several models are available for varying wall thicknesses and types of form boards. Compatible with composite form board sizes now available.

Capitol Steel stocks steel stakes in five lengths (18" through 48") for anchoring concrete forms, setting grade lines, and general layout work. Steel stakes are far more durable than wood alternatives in hard or rocky soils. Available individually or by the bundle.

The Superior Innovations Aluminum Clevis with Rubber Knob is a precision quick-connect handle attachment designed for use with Superior power trowel accessories and hand finishing tools. The knurled aluminum body provides a secure, non-slip grip, while the rubber-tipped knob allows for fast tool changes without tools.

Compatible with the Quick Attach System (QAS) line of Superior Innovations floats and accessories. Reduces downtime during finishing operations by enabling rapid tool swaps as concrete stiffens through the pour.

The Superior Innovations Concrete Rake is a professional-grade tool designed for spreading and raking fresh concrete across slab forms. Its wide head and durable construction allow crews to move large volumes of concrete quickly and evenly before screeding and finishing operations begin.

Ergonomic handle design reduces worker fatigue during large pours. The blade geometry is optimized to pull and spread concrete without dragging aggregate or creating voids in the slab.

The Superior Innovations Funny Trowel is a 22" blue steel finishing trowel with a unique shape designed to access tight corners, radius work, and detail areas that standard flat trowels can't reach efficiently. The blue steel blade provides the right balance of flexibility and stiffness for a smooth, burnished finish.

A go-to tool for finishers who need precise control on decorative concrete, stepped pours, and architectural flatwork. The ergonomic handle reduces wrist fatigue during extended finishing sessions.

The Superior Innovations Gen 3 Pro Tilt is a professional-grade trowel head assembly engineered for power trowel machines used in commercial and residential concrete finishing. The Gen 3 design delivers improved tilt sensitivity and control, allowing finishers to work efficiently across large slab pours with consistent surface quality.

Built for durability on demanding job sites. Compatible with the MagVibe Pro vibration system for maximum flatness and finish quality on structural slabs.

The Superior Innovations G3 MagVibe Pro™ Package combines the award-winning MagVibe vibration technology with the Gen 3 Pro Tilt head for a complete concrete finishing solution. The MagVibe Pro won Industry Most Innovative Product of 2016 at the World of Concrete in Las Vegas.

The electromagnetic vibration system improves concrete consolidation during power troweling, producing flatter, denser surfaces with fewer finishing passes. Ideal for warehouse floors, commercial slabs, and any project where floor flatness tolerance is critical.

The Superior Innovations Patriot is a new-generation hand float with a high-density polyethylene (HDPE) plastic bottom that glides effortlessly across fresh concrete. The HDPE base resists buildup and provides a slicker surface than traditional magnesium or aluminum floats, reducing drag and improving surface smoothness.

Lightweight and comfortable to use for extended periods. Compatible with the Quick Attach System (QAS) for easy float swaps on the job site. Ideal for residential and commercial flatwork finishing.

The Superior Innovations Pro Float Gen 3 is a precision-engineered aluminum concrete float designed for professional flatwork finishers. The Gen 3 profile improves surface contact and reduces drag, allowing finishers to work faster with less fatigue on large slab pours.

Compatible with the Quick Attach System (QAS) for fast float changes on the job site. Durable anodized aluminum construction resists wear and maintains consistent flatness over thousands of square feet of use.

The Superior Innovations Pro Glide is a precision aluminum hand float built for professional concrete finishers who demand consistent surface quality. Its low-profile design and smooth underside allow the float to glide across fresh concrete without gouging or dragging, producing an even, ready-to-finish surface.

Durable enough for daily use on commercial projects. The Pro Glide's profile is optimized for both early cream floating and final finishing passes. Compatible with Quick Attach System (QAS) for rapid interchange.

The Superior Innovations Pumper Caddy is an innovative hose management system designed to keep concrete pump hoses elevated and organized during pours. By supporting the pump hose off the slab surface, the Pumper Caddy prevents hose marks and impressions in fresh concrete while reducing hose drag for pump operators.

Lightweight and easy to reposition during pours. A practical solution for large commercial slabs where pump hose management significantly affects surface quality and finishing efficiency.

The Superior Innovations Complete RFX Hand Groover Package gives concrete finishers everything needed for accurate, consistent control joint cuts on sidewalks, slabs, and flatwork. The RFX design provides a comfortable grip and smooth rolling action for straight joints with minimal effort.

Includes all components for complete hand grooving operation. Multiple groove bit options allow different joint widths and depths to match project specifications and local code requirements.

The Superior Innovations Slab to Step Edger is a specialized concrete tool designed to produce clean, rounded edges at the transition between a horizontal slab and a step riser. This tool ensures consistent edge profiles at every step, giving residential and commercial concrete projects a professional finished appearance.

Durable steel construction with a wood handle for comfortable grip. The roller mechanism allows smooth, even movement along the slab edge for consistent results across the entire step run.

The Superior Innovations String-X is a heavy-duty layout and alignment tool designed for concrete finishing crews. Its unique design holds layout strings securely at grade, helping finishers establish accurate control joint lines, column lines, and floor flatness benchmarks before and during pours.

Built from durable materials to withstand concrete job site conditions. A simple, reliable tool that speeds up the layout process and reduces rework on large slab projects.

Superior Innovations Tool Hooks are heavy-duty job site storage hooks designed to keep finishing tools organized, off the ground, and within easy reach during concrete pours. The double-hook design accommodates trowels, floats, edgers, and other finishing tools securely.

Made from durable steel with protective rubber tips to prevent tool damage. A simple, practical accessory that helps concrete crews stay organized and efficient throughout a pour.

The Superior Innovations Top Tool is a blue steel edging tool with a 1/2" radius, designed to create clean, consistent rounded edges on formed concrete walls, steps, and slabs. The blue steel blade provides the right combination of stiffness and flexibility for smooth edge work without tearing or dragging the surface cream.

Used during the floating and finishing stage to produce professional-grade radius edges that are durable, aesthetically clean, and safe underfoot. An essential tool for residential and commercial concrete finishers.

Annealed tie wire is the standard method for securing rebar intersections on the job site. Capitol Steel stocks 16.5 and 16.0 gauge imported tie wire in convenient 4-lb coils. Works with both hand tying and rebar tying guns.

Capitol Steel stocks a complete line of vapor barriers for under-slab installation, from standard poly sheeting to the premium W.R. Meadows Perminator system. The Perminator is a multi-layer, puncture-resistant vapor retarder that meets ASTM E1745 Class A requirements — specified for commercial, retail, and healthcare slabs where moisture control is critical. Perminator Tape ensures fully sealed seams and overlaps.

Vocomp by W.R. Meadows is also available in 55-gallon drums for high-volume projects. This water-based acrylic compound cures and seals concrete in a single pass, ideal for large commercial slabs, warehouses, and industrial floors. Contact Capitol Steel for drum pricing and delivery in Sacramento.

Vocomp by W.R. Meadows is a water-based acrylic concrete curing and sealing compound that meets ASTM C309. It simultaneously cures and seals in one application, leaving a high-gloss finish that resists oil, grease, and abrasion. Capitol Steel stocks Vocomp in pails at 36 units/pallet.

Capitol Steel stocks welded wire fabric (WWF) in multiple wire gauges and sheet/roll configurations for concrete slabs, driveways, sidewalks, tilt-up panels, and shotcrete applications. Available in standard 7x20 sheets and 7x200 rolls. Contact us for pricing by the sheet or pallet.

Capitol Steel carries construction-grade wood stakes in a full range of sizes for concrete forming, survey grade marking, and general site layout. Available in 1x2 and 1x3 profiles from 18" to 48" in length. Sold by the bundle — contact us for pricing and volume orders.